AI Inventory Component Map 3D Printing Circuit Breaker

AIoT

AI-powered IoT projects, edge computing, and smart sensors for Indian makers.

19 posts

What Is AIoT — and Why Every Indian Maker Should Care

AIoT — Artificial Intelligence of Things — is not just a buzzword. It's a shift in how embedded systems are built and what they can do. For Indian makers, it opens up a genuinely new class of projects.

15 Apr 2026Read

AIoT6 min read

How AIoT Is Changing Inventory Management for Indian Electronics Labs

The same AI and connectivity technologies driving industrial IoT are now small enough and cheap enough to apply to the electronics lab bench. Inventory management is one of the first areas where this matters for makers.

12 Apr 2026Read

AIoT8 min read

Building an AIoT Home Automation System in India — What the Tutorials Don't Tell You

I've built three home automation systems over four years. The third one is the first one I'd call actually reliable. Here's the difference.

24 Apr 2026Read

AIoT6 min read

MQTT for Beginners — The Protocol That Powers Most Real AIoT Systems

After building with HTTP for months, switching to MQTT for device communication changed how my whole system worked. Here's why MQTT is the right protocol for most IoT use cases.

28 Mar 2026Read

AIoT7 min read

Running AI Inference on an ESP32 — Smaller Than You Think, More Useful Than You Expect

TensorFlow Lite and similar frameworks bring real AI inference to microcontrollers. Here's what that means for makers building AIoT systems.

12 Mar 2026Read

AIoT7 min read

ESP32 vs Raspberry Pi for AIoT Projects — An Honest Comparison

I've used both extensively. The choice matters, and the internet advice is usually oversimplified. Here's the nuanced version.

12 Apr 2026Read

AIoT8 min read

ESP32 Wi-Fi Keeps Dropping. Here's the Fix That Actually Works in Production.

Your ESP32 project works perfectly at your desk. You install it in the actual location — a meter box, a utility room, an outdoor enclosure — and it drops Wi-Fi every few hours and never reconnects without a power cycle. This is one of the most common real-world deployment failures in IoT work.

3 May 2026Read

AIoT9 min read

OTA Updates on ESP32 — How to Ship Firmware Without a USB Cable

You deploy 8 ESP32 sensors across a building. Three months later you need to update the firmware. You don't want to physically touch all 8 devices. This is why OTA (over-the-air) updates exist — and why they're more important to implement before deployment than after.

5 May 2026Read

AIoT7 min read

Why Your Sensor Readings Are Wrong (And It's Not the Sensor)

The DHT22 says 34°C. Your phone says 30°C. The sensor is correctly wired, the code is correct, the library is correct. The reading is just wrong. Here's why this happens and what to do about it.

7 May 2026Read

Showing 1–9 of 19 posts